TunerPro ADX and XDF for 1994 Chevy Cavalier

American Delco GM ECUs and PCMs, ALDL, OBD 1.5.
Post Reply
MudDuck514
Posts: 397
Joined: Wed Jul 05, 2017 8:30 am
cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E
Location: North TX, USA

TunerPro ADX and XDF for 1994 Chevy Cavalier

Post by MudDuck514 »

Hi all,

Just bought myself a 1994 Cavalier and have been searching for the .adx & .xdf files for TP5 without much luck.
I HAVE found an .xdf for a 1995 Cavalier that I believe would work as it is for the LN2 2.2l I4 that should be the same as my '94.
If so, then all I would need is a corresponding .adx to datalog the car.
SO, any help, either pointing to a pre-existing file, or help on creating one as I am new to this part and have never made one before, would be much appreciated.

Thanks in advance,

Mike.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: TunerPro ADX and XDF for 1994 Chevy Cavalier

Post by antus »

The same engine does not necessarily mean the same code in the ecm. Check the 1994 and 1995 ecm service number, and the 4 letter BCC on the memcal. If the BCC is the same there is definately no change. If its different you'll need to read the memcal and compare. Your chances though are pretty good. As for adx you might be able to find something similar and update to suit, especially if you have a factory scan tool and some wiring and software skills to monior whats going on, but start with the hardware identification.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
MudDuck514
Posts: 397
Joined: Wed Jul 05, 2017 8:30 am
cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E
Location: North TX, USA

Re: TunerPro ADX and XDF for 1994 Chevy Cavalier

Post by MudDuck514 »

Antus, thanks for your reply.
I haven't had a chance to pull the ECM out from behind the glove box yet. I will let you know what I find once I have.
I have a '6395 out of the 1994 Jimmy v6 I had, so I know what to look for as I had no problem logging that one before it died (cracked engine block last winter).
MudDuck514
Posts: 397
Joined: Wed Jul 05, 2017 8:30 am
cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E
Location: North TX, USA

Re: TunerPro ADX and XDF for 1994 Chevy Cavalier

Post by MudDuck514 »

Pulled PCM today.
This is what I found:

16191947 BJLT

Mike

1994 Chevrolet Cavalier
LN2 2.2l I-4
3-Spd Auto Trans
Post Reply