connection errors with TP
connection errors with TP
Hi all, Im looking for some help with a problem Im having.
First of all we are using nvram in our vt v6, we have had success connecting and emulating in the past but haven't been able to get it to connect or upload for a few weeks, Im still a novice at this so please be patient.
When I fire up tuner pro with our aldl usb cable connected (all pcmhacking products) it beeps and recognises the hardware, when I connect for logging it says in the status bar there are errors, see as many as 3000 in about ten minutes, I've played with the echo settings, no help, I've disconnected the bcm, I've banged my head on the steering wheel, still didn't work.
These errors seem to 'sometimes' go away if I turn off the ignition - but not every time. when there are errors being received it won't allow us to emulate or upload a file.
any ideas??
On a separate issue, I've down loaded tunerpro rt onto my new laptop, for some reason it won't recognise the ose plugin, I go to tools, preference, data Acq/emulation and its not listed, I've shut down tuner pro after cutting and pasting into the correct 'plugins' folder, I have the latest release of everything, I have read and reread all the guides but now am at a loss.
First of all we are using nvram in our vt v6, we have had success connecting and emulating in the past but haven't been able to get it to connect or upload for a few weeks, Im still a novice at this so please be patient.
When I fire up tuner pro with our aldl usb cable connected (all pcmhacking products) it beeps and recognises the hardware, when I connect for logging it says in the status bar there are errors, see as many as 3000 in about ten minutes, I've played with the echo settings, no help, I've disconnected the bcm, I've banged my head on the steering wheel, still didn't work.
These errors seem to 'sometimes' go away if I turn off the ignition - but not every time. when there are errors being received it won't allow us to emulate or upload a file.
any ideas??
On a separate issue, I've down loaded tunerpro rt onto my new laptop, for some reason it won't recognise the ose plugin, I go to tools, preference, data Acq/emulation and its not listed, I've shut down tuner pro after cutting and pasting into the correct 'plugins' folder, I have the latest release of everything, I have read and reread all the guides but now am at a loss.
According to chemistry, alcohol is a solution...
Re: connection errors with TP
just had a small brainwave.... I did last week calibrate the speedo (diff gear change) and since the srs light has been on (no srs fitted) so possibily data bus chatter from cluster looking for srs causing part of my problem? I'll turn srs off tomorrow and see
According to chemistry, alcohol is a solution...
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: connection errors with TP
Are you using oseplugin? Set for vt? Once it connects start logging straight away while chatter is disabled. Logging keeps using the data bus which keeps chatter disabled. If you wait too long chatter will turn back on.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: connection errors with TP
yep, ose plugin, set to vt, will try logging straight away and see what happens, I'll post what happens today, cheers.
ps. the dash is all over the place
ps. the dash is all over the place
According to chemistry, alcohol is a solution...
Re: connection errors with TP
Programmed out the SRS, no different. Snapped a couple of quick videos, hope they can help someone spot what im doing wrong
http://youtu.be/I1Cu2c7PF8E
http://youtu.be/dpCGYIY1JMs
http://youtu.be/skVHA6As_lY
the last video is interesting
I apologise for the crappy quality, iphone...
http://youtu.be/I1Cu2c7PF8E
http://youtu.be/dpCGYIY1JMs
http://youtu.be/skVHA6As_lY
the last video is interesting
I apologise for the crappy quality, iphone...
According to chemistry, alcohol is a solution...
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: connection errors with TP
Its a bit hard to see in the vid, what adx are you using?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: connection errors with TP
not the right one....
thankyou, will try that first thing in the morning
I feel like a complete FFFFAAAARRRRKKKK head
any ideas on the tunerpro - plug in problem?
thankyou, will try that first thing in the morning
I feel like a complete FFFFAAAARRRRKKKK head
any ideas on the tunerpro - plug in problem?
According to chemistry, alcohol is a solution...
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: connection errors with TP
No, but i'll test on the bench once I have the details, see if I can reproduce it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: connection errors with TP
Thanks antus, all working
would a short video of the plugin problem help?
Cheers.
would a short video of the plugin problem help?
Cheers.
According to chemistry, alcohol is a solution...
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: connection errors with TP
Yeah try that. Show loading the adx, the configuration page of the plugin and what happens when you hit connect and start logging. Make sure the filenames and settings are all readable.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396