Fuel Tuning E85

Tuning The Delco In Realtime
User avatar
Tre-Cool
Posts: 265
Joined: Tue Oct 16, 2012 12:17 pm
cars: VY SS UTE, VX Drag Car
Location: Perth
Contact:

Re: Fuel Tuning E85

Post by Tre-Cool »

I wouldnt think you'd find any ethanol content in fuel in WA except for United's.

I've setup/installed flex into a few VE car's and they will get down to 0% no worries at all once you stop using ethanol.
User avatar
Tre-Cool
Posts: 265
Joined: Tue Oct 16, 2012 12:17 pm
cars: VY SS UTE, VX Drag Car
Location: Perth
Contact:

Re: Fuel Tuning E85

Post by Tre-Cool »

Holden202T wrote:easiest yes, not the most correct way to do it though ;)

you'd also want to increase the flow rate by 35% not reduce it.
depends on ecu code i guess, but seeing as you need more ethanol vs pump. then reducing your IFR from say 10g/sec to 7.5 (not being exact just making up numbers) the ecu will think the injectors are smaller. which they kinda are when they now have to spray 35-40% more fuel in for the same inj pw.

Really depends on your base ecu code etc on what your injector limits can handle. I've had to do that in the ls1 code because it wont accept a stoich afr lower than 10.
Post Reply