gemini tuning help
Re: gemini tuning help
It starts easy and idles well, I know temps are reading right. Map I know what it dose, but not real sure what I really should be seeing with it.
I'm by no means a delco noob, just first time really trying to tune anything.
This build has been a pipe dream from back in the old pulsar forum thread about tuning the 808.
But being a fresh motor I'm nervous about breaking it
I'm by no means a delco noob, just first time really trying to tune anything.
This build has been a pipe dream from back in the old pulsar forum thread about tuning the 808.
But being a fresh motor I'm nervous about breaking it
Re: gemini tuning help
What map reading are you seeing at idle?
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: gemini tuning help
When I looked at the map with the data list it looks correct but when playing the graph it's going off the scale and also it doesn't show it till 22 seconds so it might be an ADX error. Anyway as previously mentioned get the alternator charging properly first.
My bad. I was looking at the scaled map. Not sure abt that one. Maybe VL400 can advise.
My bad. I was looking at the scaled map. Not sure abt that one. Maybe VL400 can advise.
Re: gemini tuning help
Are you running 12P?
Re: gemini tuning help
Dylan, yes 12p and about about 60kpa at idle.
But it has a mild can and a VN throttle body
Charles I will see if I can find a spare reg to sort out charging.
I will get some new logs later today and have a tinker and see what I can't come up with.
Thanks for the input so far guys
But it has a mild can and a VN throttle body
Charles I will see if I can find a spare reg to sort out charging.
I will get some new logs later today and have a tinker and see what I can't come up with.
Thanks for the input so far guys
Re: gemini tuning help
If it's 12P I wouldn't expect any ADX errors.
60 koa isn't unexpected for a decent camshaft either so thats probably OK.
60 koa isn't unexpected for a decent camshaft either so thats probably OK.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: gemini tuning help
what about 85kpaDylan wrote:If it's 12P I wouldn't expect any ADX errors.
60 koa isn't unexpected for a decent camshaft either so thats probably OK.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: gemini tuning help
Oh close, I had 90 on my old Clubsport. Hovered to 93 a bit too.
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: gemini tuning help
lol I had one that was totally fucked that idled at 85, had an intake valve bent or something or broken spring.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: gemini tuning help
I remember that one, your mate ! Lol