connecting issue

Tuning The Delco In Realtime
Post Reply
User avatar
InspectorCabbage
Posts: 21
Joined: Sun May 20, 2018 12:33 pm
cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto
Location: Bacchus Marsh Vic

connecting issue

Post by InspectorCabbage »

hey does anyone have ideas to why my i can only connect to my NVRam after hitting hardware, and the states coming up all over the place? recorded how it was going with and without the rw jumper on if that makes any difference to logs, i also reved about half way through each test aswell,
i havent changed the NVram yet thats still with standard 1enhanced for a vs s/c and im using an envoys cable
Attachments
NVRam without jumper.xdl
(11.14 KiB) Downloaded 400 times
nvram with RW jumped.xdl
(33.02 KiB) Downloaded 400 times
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: connecting issue

Post by antus »

That shouldnt be the case. Maybe Tazzi can help with that cable.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
InspectorCabbage
Posts: 21
Joined: Sun May 20, 2018 12:33 pm
cars: Holden Commodore 96 Ute L67 Getrag
Holden Statesman 97 Ecotec
Holden Commodore 95 VR ute 5lt auto
Location: Bacchus Marsh Vic

Re: connecting issue

Post by InspectorCabbage »

antus wrote:That shouldnt be the case. Maybe Tazzi can help with that cable.
How do i get incontact with Tazzi?
User avatar
oldn64
Posts: 256
Joined: Mon May 28, 2018 5:05 pm
cars: Vq Statesman, VE SS wagon, VE Sv6, VY SV8, VL Belina
Location: Country Victoria on a direct road to WINTON

Re: connecting issue

Post by oldn64 »

InspectorCabbage wrote:
antus wrote:That shouldnt be the case. Maybe Tazzi can help with that cable.
How do i get incontact with Tazzi?
There are a number of ways,

you can pm him here.
you could ring him on his mobile (located on his website) please for his sake remember he is in WA so if you are eastern states then you need to ring later in the day otherwise you will awake him from his slumber

Cheers
oldn64
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: connecting issue

Post by Tazzi »

InspectorCabbage wrote:
antus wrote:That shouldnt be the case. Maybe Tazzi can help with that cable.
How do i get incontact with Tazzi?
Give me a call during work hours or send an email :thumbup:
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
Post Reply