How to loose 200kgs?....

[immortality]

Less weight, more powa.....

Gonna be fun to drive

[vlad01]

We need more power though. More!

[Holden202T]

yeah I've heard a few dyno operators check age of tyres and top speeds for this very reason, good to see no major injuries though!

[Charlescrown]

We had an arsehauler 304 on the dyno once and my mate pointed the rear tyres to me and they had squashed down to about 20mm side profile on the rollers so I decided it was time to watch from a distance. Scary.

[Gareth]

It really is a tyre shredding monster

[Gareth]

Hi all,

I'd love some feedback on this E85 tune Vlad and I have been playing with. I think that there
is not enough timing in the high load area. Old tune had more (36deg) and ran premium with years of ping free opreation, but this is what we got as MBT?...

OSE_$11P V104 CAKH V6_E85_VH_Ecotec.bin

(64 KiB) Downloaded 196 times

OSE_$11P V104 1Bar_CalcVE_E85.adx

(165.6 KiB) Downloaded 197 times

VH log2.xdl

(711.51 KiB) Downloaded 200 times

VH log3.xdl

(240.14 KiB) Downloaded 200 times

log number three is without the plenum lid spacer, there was almost no difference in power or torque

[Gareth]

Here is the old tune from the old PCM (MAF)

W71.xdf

(73.99 KiB) Downloaded 201 times

VHV6racecar-cracked.bin

(64 KiB) Downloaded 190 times

[delcowizzid]

timing is probably fine being that a buick will take around 28 before no more worth while gains are to be had.ecotec has a more efficient chamber design

[Dylan]

How much timing do you ru on normal petrol delcowizzid? I done one for a mate a while ago think I peaked at 22. Was a bit hesitant to put much into it.

[Holden202T]

first thing i'd say is, from 5200rpm onwards i'd increased the 100kpa VE's to about 90

i can't see anything specifically wrong with it other than that!

as for timing, whatever makes the most torque has to be pretty close to the right spot!