My First Lathe!

A place For General Chit Chat Etc
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: My First Lathe!

Post by delcowizzid »

That bellhousing is bop pattern out t350 had both chev and bop think th200r out of the gn has the same pattern
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: My First Lathe!

Post by Holden202T »

This is it after i did a bare minimum slap together to make sure it all works.

[youtube]https://www.youtube.com/watch?v=44SfncLikcU[/youtube]
I have a felpro full gasket kit and a few other parts for it, eventually i hope to rebuild it with some faster bits.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: My First Lathe!

Post by antus »

Nice work :thumbup:
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: My First Lathe!

Post by vlad01 »

Those blocks have some really good go fast bits available for them. The alloy stage 2 heads would be a nice addition ;)


Here is a reco one I found a while ago except it has the late GM 60 bellhousing pattern like VN-VY has so it should fit them. Wouldn't that be cool to have with stage 2 heads and turbo GN style front TB intake.


https://www.ebay.com.au/itm/BUICK-231-3 ... SwktFdV6Jt
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Post Reply