VR with l67 help needed
Re: VR with l67 help needed
Ok so what should i do delcowizzid?
-
- Posts: 2877
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: VR with l67 help needed
I'm pretty sure in the $11p package there was a start tune for L67 as I had done one with VS L67 & the VS L67 box behind it.
Re: VR with l67 help needed
Vx L67 getrag
Mines in a vr with complete L67 motor and using vr 4l60e and vr ecu
If that tune you talk about exists can I copy the timing maps and fuel settings and ve table to get me going?
Or cause it's vs and uses a maf it's gonna be out also?
Mines in a vr with complete L67 motor and using vr 4l60e and vr ecu
If that tune you talk about exists can I copy the timing maps and fuel settings and ve table to get me going?
Or cause it's vs and uses a maf it's gonna be out also?
-
- Posts: 2877
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: VR with l67 help needed
It's a bin created to run the L67 on the VR computer hence $11P custom code.
It will run the early 4L60E without the TCC controlled by PWM or can also run the later 4L60E that has TCC with PWM control & the area to change those settings is in between $5219 & $548D need to be copied across to allow for it to work properly!
It will run the early 4L60E without the TCC controlled by PWM or can also run the later 4L60E that has TCC with PWM control & the area to change those settings is in between $5219 & $548D need to be copied across to allow for it to work properly!
- Attachments
-
- OSE_$11P V103 CAKH V6 __ L67.BIN
- (64 KiB) Downloaded 163 times
Re: VR with l67 help needed
So the bin you just posted is for a l67 engine in a vr running a vs 4l60e?
Any chance you can change the auto setting for me to suit my vr 4l60e . As it is beyond my skill level in tuner pro.
Thanks so much for this
Any chance you can change the auto setting for me to suit my vr 4l60e . As it is beyond my skill level in tuner pro.
Thanks so much for this
-
- Posts: 2877
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: VR with l67 help needed
with info I was given this should do the trick!
- Attachments
-
- OSE_$11P V103 CAKH V6 __ L67 with non PWM TCC.BIN
- (64 KiB) Downloaded 154 times
Re: VR with l67 help needed
vx l67 getrag thanks mate
About to buy a aldl cable of here to go with my old school moates ostrich.
Fired up your custom tune vx l67 getrag and looks like the timing maps are a bit scattered.
Ve fuel table i can sort out with my wideband no worries
But the timing boost table should i use this vt super 6 table below?
I mean the 450 onwards table part of vt super 6 map looks like its boost onwards as its pulling timing slowly. Should i drop this into my 11p boost part of map to get me going ?
See pics below
sorry about all the questions
About to buy a aldl cable of here to go with my old school moates ostrich.
Fired up your custom tune vx l67 getrag and looks like the timing maps are a bit scattered.
Ve fuel table i can sort out with my wideband no worries
But the timing boost table should i use this vt super 6 table below?
I mean the 450 onwards table part of vt super 6 map looks like its boost onwards as its pulling timing slowly. Should i drop this into my 11p boost part of map to get me going ?
See pics below
sorry about all the questions
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: VR with l67 help needed
That appears to be the stock vr spark table in the 2nd pic.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 2877
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: VR with l67 help needed
It's just a file that was created to get to a start point, so adjust fuel & timing as needed & it won't directly relate to the standard L67 files as there created for MAF & not MAP.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VR with l67 help needed
20 degrees everywhere on boost won't be nice haha
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem