hey guys,
I have eco swapped a vg ute with a t5 gearbox on a vy loom and ecu im currently trying to get the ecu to read the vss signal i have had the ecu programmed to be manual and they didnt check the getrag option which is what we thought would allow the ecu to read the vss signal but im just seeing if anyone else has read a vss signal in the vy ecu and what pin you had the wire go to and how you had the manual options in the ecu.
Cheers.
Vss Signal on vy ecu
Re: Vss Signal on vy ecu
If it helps, on a V6 VX, the transmission speed pick-up sensor goes to D1 and D2 on the PCM.
Joe.
Joe.
Re: Vss Signal on vy ecu
Hi,
I've not played much with the vss stuff but am curious if it even matters since it should be sine wave.
-Carl
I've not played much with the vss stuff but am curious if it even matters since it should be sine wave.
-Carl
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Vss Signal on vy ecu
No the VG uses a hall effect sensor. This might be a problem, I am not sure though.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396