ECM’s
- vlad01
- Posts: 7798
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: ECM’s
VN-VP 808, you can tell more from the case than the boards
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- vlad01
- Posts: 7798
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: ECM’s
Just noticed the date codes.
Left 92 April so VP, right is September 91 so late VN or early VP.
I checked mine in the shed, I got one early 93 and one so old it's got no date codes at all and very crusty looking solder mask, also been repaired too at some stage, main CPU oscillator circuit caps had been replaced.
Left 92 April so VP, right is September 91 so late VN or early VP.
I checked mine in the shed, I got one early 93 and one so old it's got no date codes at all and very crusty looking solder mask, also been repaired too at some stage, main CPU oscillator circuit caps had been replaced.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: ECM’s
Cover side.
I’ve edited parts as someone has written some terrible words on it.
Just to note I haven’t written that Race 215kw on the other.
I’ve edited parts as someone has written some terrible words on it.
Just to note I haven’t written that Race 215kw on the other.
Re: ECM’s
I’ll admit I know stuff all. Are both suitable to work Air Con? A lot of NZ cars weren’t fitted with A/C new.
- vlad01
- Posts: 7798
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: ECM’s
Yes, AC is just wiring to enable it, all tunes had AC idle offsets as default as far as I know, only a matter if it was physically fitted and wired up at the factory.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: ECM’s
Where are the date codes on the PCBs? I was not aware there were any.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vlad01
- Posts: 7798
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: ECM’s
On the back side etched in as part of the PCB layout, assuming week/year. I checked mine and the line up with when the cars were built from which they were taken.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: ECM’s
Gotcha 1692 and 3691 near the bottom left. Thanks
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396