Help 396

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
Jaydo383
Posts: 6
Joined: Sun Jan 10, 2021 3:59 pm
cars: L67 powered vh 383 powered hz 1 tonner and a stock eh

Help 396

Post by Jaydo383 »

Hi guys ive got a l67 with a t5 in a vh commodore its running a 396 ecu with no body control module is it possible to hook up an aldl cable directly to the 396?
vs ss
Posts: 591
Joined: Thu Nov 03, 2011 7:57 pm
cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1
Location: perth wa

Re: Help 396

Post by vs ss »

Yes! The bcm is on the same bus as the pcm but the pcm doesn’t go through it. So yes you can hook an obd connector to the pcm.

Pcm f14 w/b to pin 6 on obd
Pcm a3 r/b to pin 9 on obd
Obd pin 5 to earth
Obd pin 16 to battery 12v
Jaydo383
Posts: 6
Joined: Sun Jan 10, 2021 3:59 pm
cars: L67 powered vh 383 powered hz 1 tonner and a stock eh

Re: Help 396

Post by Jaydo383 »

Thanks heaps for your help this is exactly what i was after
Post Reply