I have added to "Parameters.Standard.xml":
Code: Select all
<Parameter
id="0052"
name="Ethanol 52"
description=""
byteCount="01"
bitMapped="False">
<Conversion units="%" expression="x/2.5" format="0.00" />
</Parameter>
<Parameter
id="12F3"
name="Ethanol 12F3"
description=""
byteCount="01"
bitMapped="False">
<Conversion units="%" expression="x/2.5" format="0.00" />
</Parameter>
Pid 0x12F3 shows always 0
With pcmlogger14, if I have both configured, debug log says 12F3 is configured, but it shows value 4.8% for pid 52
MAYBE I have something wrong with sensor or wiring, but I have tested with 2 different sensors and measured wires & voltages multiple times.
Pid 0x52:
https://en.wikipedia.org/wiki/OBD-II_PIDs
52 82 1 Ethanol fuel % 0 100 %
Pid 0x12F3 found by UniversalPatcher