STiC Technology SVCI J2534 Tool
Re: STiC Technology SVCI J2534 Tool
oops pin 6 (CanH), pin 14 (CanL) after a couple of cans got myself confused, both to u10 assuming
then 2 and 10 for j1850...
then 2 and 10 for j1850...
Re: STiC Technology SVCI J2534 Tool
This is a pretty good description
Re: STiC Technology SVCI J2534 Tool
Just different excel file versions, the data is the same in both files ??
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: STiC Technology SVCI J2534 Tool
J2534 is basically a standardized DLL format so any software can utilize the same commands in any J2534 compliant tool.
Realistically, a J2534 DLL could be written for any tool. Even the dreaded ELMs (cringes at the thought).
But there is a reason why that doesnt exist for the ELMs, becuase they are lacking the capability to deal with multi frame responses, are slow and never intended to be used for such complex operations.
Interesting to hear they were trying to implement both an ELM protocol and also J2534 on the same tool, this is the first time I have ever heard of a company doing this other then Pete and I with the OBDX.
Realistically, a J2534 DLL could be written for any tool. Even the dreaded ELMs (cringes at the thought).
But there is a reason why that doesnt exist for the ELMs, becuase they are lacking the capability to deal with multi frame responses, are slow and never intended to be used for such complex operations.
Interesting to hear they were trying to implement both an ELM protocol and also J2534 on the same tool, this is the first time I have ever heard of a company doing this other then Pete and I with the OBDX.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: STiC Technology SVCI J2534 Tool
Yes, just early and late excel. I posted both since I have older lappys and some still use office '97. I thought it would be nice to post both depending on which version people have.Gampy wrote:Just different excel file versions, the data is the same in both files ??
Re: STiC Technology SVCI J2534 Tool
Yes, Tazzi, I understand ... Thank you!
I was surprised they are both (J2534/ELM) done in the same firmware, I expected two circuits.
In-Tech, Yes, I use 97 as well so thank you for the .xls, you can just pass the .xls considering Excel is backwards compatible and can open an older file.
I was surprised they are both (J2534/ELM) done in the same firmware, I expected two circuits.
In-Tech, Yes, I use 97 as well so thank you for the .xls, you can just pass the .xls considering Excel is backwards compatible and can open an older file.
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: STiC Technology SVCI J2534 Tool
Shhh, don't tell anyone!
I think this device may have J1850VPW in the firmware, just not exposed.
Not entirely confident on that yet ...
Been on J2534 and doing a bit of and the results are ... BTW, Anyone have a searchable J2534 standard other then the DrewTech one, the full SAE one I have is a scan and cannot be searched.
I think this device may have J1850VPW in the firmware, just not exposed.
Not entirely confident on that yet ...
Been on J2534 and doing a bit of and the results are ... BTW, Anyone have a searchable J2534 standard other then the DrewTech one, the full SAE one I have is a scan and cannot be searched.
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 1834
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: STiC Technology SVCI J2534 Tool
What's going on with battery voltage? 16.6?
Re: STiC Technology SVCI J2534 Tool
No clue, this device has always shown high, looking back in this thread I see 20.6 ... The SparkFun board (STN1110) reports v13.6.
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 305
- Joined: Fri Jul 30, 2021 5:49 pm
- cars: 97 Corvette
92 Camaro
2005 Silverado
2001 Savana 2500
1998 c3500hd
1998 tahoe
Re: STiC Technology SVCI J2534 Tool
Hey Gampy,
How far did you get with this?
How far did you get with this?