Hello,
Does anyone know what is the bus message for Fuel Level on a C5 is? I thought it was 8312 but this doesn't appear to be the case. Any help would be welcome.
Thanks
Fuel Level J1850 bus message C5
-
- Posts: 81
- Joined: Sun May 11, 2014 6:36 pm
- cars: Z06
-
- Posts: 81
- Joined: Sun May 11, 2014 6:36 pm
- cars: Z06
Re: Fuel Level J1850 bus message C5
or does anyone have just a sniff of a c5?
Thanks
Thanks
Re: Fuel Level J1850 bus message C5
what problem are you having/trying to solve?
-
- Posts: 81
- Joined: Sun May 11, 2014 6:36 pm
- cars: Z06
Re: Fuel Level J1850 bus message C5
Trying to figure out why my cluster will not respond to 8312 broadcast for fuel level.
Re: Fuel Level J1850 bus message C5
With tech2 you can command fuel level gauge on ipc. That is the easiest way to troubleshoot. If it doesn`t move the stepper motor went bad for the fuel gauge, or the ipc itself have some issues.
-
- Posts: 81
- Joined: Sun May 11, 2014 6:36 pm
- cars: Z06
Re: Fuel Level J1850 bus message C5
Stepper motor moves as it moves every time I key cycle. I wonder if the command is the same as the broadcast message, which i doubt.