E55 VZ Images
Re: E55 VZ Images
Why are all these bins missing Secondary OS?
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: E55 VZ Images
They are split up into 3 different modules and compressed
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: E55 VZ Images
These Bin files are complete SPS Copys and work fine for what I require when changing entire operating systems over. Unsure what else you require from them?mattyjf01 wrote:Why are all these bins missing Secondary OS?
Re: E55 VZ Images
I understand the separate sps gzipped modules from TDS
but all of the complete images are missing module number 3 (aka System Cal or Secondary operating system)
eg module 1: 92179470 module 3: 92179471
module 1: 92190064 module 3: 92190065 etc..
Unless the software you're using to write detects the main OS and automatically inserts the Secondary OS?
Sorry for all the questions but im trying to make my vzflasher software compatible with different file structures
At the moment it can write sps gzipped and full bin files
If leaving out the Secondary OS is a common standard ill incorporate that into the software too
but all of the complete images are missing module number 3 (aka System Cal or Secondary operating system)
eg module 1: 92179470 module 3: 92179471
module 1: 92190064 module 3: 92190065 etc..
Unless the software you're using to write detects the main OS and automatically inserts the Secondary OS?
Sorry for all the questions but im trying to make my vzflasher software compatible with different file structures
At the moment it can write sps gzipped and full bin files
If leaving out the Secondary OS is a common standard ill incorporate that into the software too
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: E55 VZ Images
Sorry been away from this for a while.mattyjf01 wrote:I understand the separate sps gzipped modules from TDS
but all of the complete images are missing module number 3 (aka System Cal or Secondary operating system)
eg module 1: 92179470 module 3: 92179471
module 1: 92190064 module 3: 92190065 etc..
Unless the software you're using to write detects the main OS and automatically inserts the Secondary OS?
Sorry for all the questions but im trying to make my vzflasher software compatible with different file structures
At the moment it can write sps gzipped and full bin files
If leaving out the Secondary OS is a common standard ill incorporate that into the software too
All the dumps i'd put up were from a kess clone(unreliable piece of crap), just how it copied them.
Any other modules were pulled from TIS2000 directory.
Just how it was with the tools I had at hand.
For programming I just use a tech2, software must work some magic and just write appropriately from the VIN and supplied info regarding transmission type etc etc
Re: E55 VZ Images
All good
I use Ktag/Kess clone never failed me yet
I just saved all 6 main and secondary OS to folders and made it look for the corresponding Secondary OS
I use Ktag/Kess clone never failed me yet
I just saved all 6 main and secondary OS to folders and made it look for the corresponding Secondary OS
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203