I developed this XDF based on the 7603 file that is on here. Feel free to use and give feedback for anything that may need to be touched up. This is a collection of work from many people, so I cannot take complete credit.
!!! FOR USE ONLY ON 2003 P59 EQUIPPED WITH THE INTEL CHIP !!!
OS 12593058 P59 XDF File (INTEL CHIP ONLY!!!)
- Phoenix
- Posts: 112
- Joined: Sat Aug 22, 2020 5:02 am
- cars: 1983 Chevy C10
1993 Ford Mustang LX 5.0
2004 Pontiac GTO
2005 Pontiac GTO - Location: Anna, TX
OS 12593058 P59 XDF File (INTEL CHIP ONLY!!!)
- Attachments
-
- 12593058 OS - V.1.1.zip
- (157.04 KiB) Downloaded 491 times
Re: OS 12593058 P59 XDF File (INTEL CHIP ONLY!!!)
This NOT an Intel only OS ... It supports AMD as well!
-Enjoy
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 15
- Joined: Wed Jul 28, 2021 12:36 am
- cars: volvo
Re: OS 12593058 P59 XDF File (INTEL CHIP ONLY!!!)
universal patcher and this XDF disagree about the location of vats and vtd config. not sure which is correct.
Thanks
Thanks
-
- Posts: 15
- Joined: Wed Jul 28, 2021 12:36 am
- cars: volvo
Re: OS 12593058 P59 XDF File (INTEL CHIP ONLY!!!)
also figured i would say THANK YOU to the op for working on all of these XDF files, it has been a big help.
- Phoenix
- Posts: 112
- Joined: Sat Aug 22, 2020 5:02 am
- cars: 1983 Chevy C10
1993 Ford Mustang LX 5.0
2004 Pontiac GTO
2005 Pontiac GTO - Location: Anna, TX
Re: OS 12593058 P59 XDF File (INTEL CHIP ONLY!!!)
It's very possible that I got it wrong. I'll double check later.bobcratchet555 wrote:universal patcher and this XDF disagree about the location of vats and vtd config. not sure which is correct.
Thanks
-
- Posts: 15
- Joined: Wed Jul 28, 2021 12:36 am
- cars: volvo
Re: OS 12593058 P59 XDF File (INTEL CHIP ONLY!!!)
thanks, I also posted in the universal patcher thread on gearhead-efi
Universal patcher is confusing on this one, as the drop down for VTD_Configuration has two options "0:Class 2" and "1:None" but then the help text says
"VTD_Configuration
This is used to activate the different VTD functionalities within the PCM., Units: Unitless
Controls whether or not a vehicle theft deterrent system is present, and if the fuel will be cut off when the proper parameters are not met to allow the vehicle to start. 0 = VTD signal revieved via class 2 comm., 1 = VTD signal recieved via pulsewidth modulated signal, 2 = No VTD present.
Current value: 2 (Out of range) [02] [ Min: 0 Max: 1] "
So.....which is it?
I will say that, if i set it to 1 in universal patcher it shows up as 1 in tunerpro using this XDF.
Universal patcher is confusing on this one, as the drop down for VTD_Configuration has two options "0:Class 2" and "1:None" but then the help text says
"VTD_Configuration
This is used to activate the different VTD functionalities within the PCM., Units: Unitless
Controls whether or not a vehicle theft deterrent system is present, and if the fuel will be cut off when the proper parameters are not met to allow the vehicle to start. 0 = VTD signal revieved via class 2 comm., 1 = VTD signal recieved via pulsewidth modulated signal, 2 = No VTD present.
Current value: 2 (Out of range) [02] [ Min: 0 Max: 1] "
So.....which is it?
![Smile :)](./images/smilies/icon_e_smile.gif)
I will say that, if i set it to 1 in universal patcher it shows up as 1 in tunerpro using this XDF.
-
- Posts: 15
- Joined: Wed Jul 28, 2021 12:36 am
- cars: volvo
Re: OS 12593058 P59 XDF File (INTEL CHIP ONLY!!!)
response on gearhead efi from @joukoy
(sorry, i should've tried to get it all done here)
"This is one issue, that bring confusion alot.
Hope it gets cleared once and for all.
There is 2 type of settings. First settings is for 512kb bins. It got 3 settings 0=class2,1=PWM,2=NONE.
The other type is for 1mb bins and 512kb flex fuel bins. It got 2 settings 0=class2,1=None
Most people just copy over settings from commercial software, and apply the 3 settings types to all xdfs, not aware they are not used on all bins.
If you have bin that shows out of range, just set it appropriate to the bin."
(sorry, i should've tried to get it all done here)
"This is one issue, that bring confusion alot.
Hope it gets cleared once and for all.
There is 2 type of settings. First settings is for 512kb bins. It got 3 settings 0=class2,1=PWM,2=NONE.
The other type is for 1mb bins and 512kb flex fuel bins. It got 2 settings 0=class2,1=None
Most people just copy over settings from commercial software, and apply the 3 settings types to all xdfs, not aware they are not used on all bins.
If you have bin that shows out of range, just set it appropriate to the bin."