godiag nano with pcmhammer
-
- Posts: 305
- Joined: Fri Jul 30, 2021 5:49 pm
- cars: 97 Corvette
92 Camaro
2005 Silverado
2001 Savana 2500
1998 c3500hd
1998 tahoe
Re: godiag nano with pcmhammer
Did you try the new drivers or firmware?
-
- Posts: 305
- Joined: Fri Jul 30, 2021 5:49 pm
- cars: 97 Corvette
92 Camaro
2005 Silverado
2001 Savana 2500
1998 c3500hd
1998 tahoe
Re: godiag nano with pcmhammer
tried downloading new j1979 software and updating firmware to version 1.8 and then tried hammer on p01. tried 4x and 1x without success. here's the log
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: godiag nano with pcmhammer
It looks like its breaking as soon as it tries to send the first 10 byte packet.
Code: Select all
[02:03:09:634] J2534 setting VPW 4X
[02:03:09:634] Sending 'test device present' notification.
[02:03:09:634] TX: 8C FE F0 3F
[02:03:09:634] Sending 'test device present' notification.
[02:03:09:634] TX: 8C FE F0 3F
[02:03:09:634] Loaded C:\Users\Cincinnatus\Desktop\PcmHammer021.2\Kernel-P01.bin
[02:03:09:634] Sending upload request for kernel size 7890, loadaddress FF8000
[02:03:09:634] TX: 6C 10 F0 34 00 10 00 FF 80 00
[02:03:12:635] Send failed. Attempt #1
[02:03:12:635] TX: 6C 10 F0 34 00 10 00 FF 80 00
[02:03:15:635] Send failed. Attempt #2
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396