This thing has got me stonkered, I have found & edited another 20 or so table to try & get this thing from smoke at full load fuel tables with 11-13AFR & still no change...
Has anyone had any experience with these(new changes attached that didn't work)
Opel EDC16C39 Turbo Diesel Tuning
-
VX L67 Getrag
- Posts: 2884
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Opel EDC16C39 Turbo Diesel Tuning
- Attachments
-
- 2007 TH Astra 1.9Tdci EDC16C39.xdf
- (89.7 KiB) Downloaded 74 times
-
- new3.bin
- (2 MiB) Downloaded 89 times
-
VX L67 Getrag
- Posts: 2884
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Opel EDC16C39 Turbo Diesel Tuning
Seems that change I made to hopefully stop skid control didn't work either in that change of latest file.
Re: Opel EDC16C39 Turbo Diesel Tuning
Hello
You need to increase Lambda values to get less smoke.
FMTC_trq2qBas should extend torque axis, because of request in Torque limiter.
You don´t need to modify SOI maps at this moment.
You need to increase Lambda values to get less smoke.
FMTC_trq2qBas should extend torque axis, because of request in Torque limiter.
You don´t need to modify SOI maps at this moment.
-
VX L67 Getrag
- Posts: 2884
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Opel EDC16C39 Turbo Diesel Tuning
Excellent, o.k. that seems back to front to me, but I'll give it a go... I was told because the drivers wish was adjusted below 2000rpm is why it was smoking so much so any tips & advice is appreciated!