Purchase Kalmaker

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
User avatar
Rhysk94
Posts: 51
Joined: Sun Mar 15, 2020 7:25 pm
cars: VE SS-V
VY V6 Turbo “Ecojet”
FG XR6 Turbo
VY V6 Stocker Farm Hack
VY V6 Turbo Manual Drift Hack
VY L67 Calais
N80 Toyota Hilux
VX Stocker Farm Hack
FG XR6 Turbo
Location: Perth
Contact:

Purchase Kalmaker

Post by Rhysk94 »

Does anyone here have Kalmaker for sale?
I run RKGarage Performance & Electrical here in Perth.
More people want to go mafless than they want to stay maf.
Aftermarket Ecu's are generally out of the budget in the V6 scene but a Kalmaker based tune is not.
Send me a private message if you are willing to sell.
Cheers
h4x0r
Posts: 78
Joined: Tue May 17, 2016 11:01 pm

Re: Purchase Kalmaker

Post by h4x0r »

Why would anyone use Kalmaker over TunerPro?
User avatar
antus
Site Admin
Posts: 8250
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Purchase Kalmaker

Post by antus »

Because in workshop (not SP3 which was for the early PCMs only) they have a commercial MAP tune for the later model PCMs, where as we only have extended (enhanced) MAF. Enhanced is capable, but some people still want to tune MAP. If you have tunerpro definitions for editing and logging the Kalmaker MAP bins I am sure people who owned a copy would use them. To the best of my knowledge there are only a couple of specific versions where aftermarket people have put in the work to make them. They are on this site. Here is a matrix I archived from the kalmaker site when it existed about program versions and what they are for. W means Workshop, the number in the tens is computer type, the number in the units is the feature. They used to be sold individually, or bundled in a package, then copy protected and licensed for individual PCMs.
Attachments
workshop versions.gif
workshop versions.gif (9.16 KiB) Viewed 430 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Rhysk94
Posts: 51
Joined: Sun Mar 15, 2020 7:25 pm
cars: VE SS-V
VY V6 Turbo “Ecojet”
FG XR6 Turbo
VY V6 Stocker Farm Hack
VY V6 Turbo Manual Drift Hack
VY L67 Calais
N80 Toyota Hilux
VX Stocker Farm Hack
FG XR6 Turbo
Location: Perth
Contact:

Re: Purchase Kalmaker

Post by Rhysk94 »

h4x0r wrote: Wed Apr 03, 2024 10:39 pm Why would anyone use Kalmaker over TunerPro?
Mafless.
VX L67 Getrag
Posts: 2882
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Purchase Kalmaker

Post by VX L67 Getrag »

There is quite a few options out there with good support to go mafless on delco, just the flash pcm on vx-vy N/a don't have it available at this stage I believe.
Post Reply