Engine conversion Mazda bravo V6 ecotec
-
- Posts: 29
- Joined: Sat Aug 02, 2014 12:49 pm
- cars: vx calais ls1 cammed 280rwkw
Turbo wh v6 statesman power unknow - Location: Queensland Proserpine
- Contact:
Engine conversion Mazda bravo V6 ecotec
Hi guys hoping someone can help me out I recently acquired a Mazda bravo with a vs Ecotec in it it has a engine wiring conversion kit I can get it to crank over but no engine light or spark but when the engine light dose come on very nearly I get spark me and my 9yo daughter the key turner would like to get it started I have a external pump in a fuel drum for fuel supply I'm not sure if injectors are firing when we had spark has no way of checking I have swapped fuses from the fuse bank all look good and all have power when tested with a light I have looked at the company's web site but could not find much information below is a pick of the harness and a few pics of what I'm dealing with any help would be great thanks guys
-
- Posts: 29
- Joined: Sat Aug 02, 2014 12:49 pm
- cars: vx calais ls1 cammed 280rwkw
Turbo wh v6 statesman power unknow - Location: Queensland Proserpine
- Contact:
Re: Engine conversion Mazda bravo V6 ecotec
This is day three of trying to get it to run
-
- Posts: 1220
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: Engine conversion Mazda bravo V6 ecotec
I would take a guess that the memcal needs the VATS (vehicle anti theft system) disabled. If you can take the cover off the ecu and get a photo of the memcal and see if there are any stickers or writing on it would help to confirm.
-
- Posts: 29
- Joined: Sat Aug 02, 2014 12:49 pm
- cars: vx calais ls1 cammed 280rwkw
Turbo wh v6 statesman power unknow - Location: Queensland Proserpine
- Contact:
Re: Engine conversion Mazda bravo V6 ecotec
Memcal had no stickers or writing on it
-
- Posts: 1220
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: Engine conversion Mazda bravo V6 ecotec
I would guess it may be stock and require vats off. Can you remove the blue cover and take a photo of the chip?
Re: Engine conversion Mazda bravo V6 ecotec
Was the car running with conversion? Try probing one of your injector plugs with your test light while cranking or buy one of those Noid test kits from supercheap or repco for around $70.