VE V8 Auto to Manual Conversion Programming

Ecu Hardware Modifications
VX L67 Getrag
Posts: 2916
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: VE V8 Auto to Manual Conversion Programming

Post by VX L67 Getrag »

I had a feeling it was that but thought on later models it was only tech2win that worked, but thank you!
User avatar
antus
Site Admin
Posts: 8365
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: VE V8 Auto to Manual Conversion Programming

Post by antus »

GDS2 replaced the Tech2/Tech2win, but I think VE made it in to the last release of t2.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
julespatch
Posts: 159
Joined: Fri Aug 25, 2017 5:28 pm
cars: liberty gen 5
Location: Adelaide

Re: VE V8 Auto to Manual Conversion Programming

Post by julespatch »

hi guys. this is a car im working on.
i managed to flash a 2006 manual vin number in this arvo and got everything working apart from the radio. it asks for a regular VE SS red screen type whereas this car has a full screen GTS type setup.
the radio works with original vin in the BCM and can be flashed with the original vin number i think - ill have to check that again but im 80% sure it's good.
so close...

i dont suppose anyone has a VIN for a 2006 / early 2007 VE SS Manual with that radio type?
Attachments
20210217_165927.jpg
VX L67 Getrag
Posts: 2916
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: VE V8 Auto to Manual Conversion Programming

Post by VX L67 Getrag »

I had a quick look what I had on my HDD & found these not sure if it helps...

2006 GTS Auto 6G1ZX54U46L547644

2007 GTS Manual 6G1EX55U57L000000(obviously zero'd out main identifier)

Than another 2007 GTS Manual but only the last digits from eeprom read 7L879887
User avatar
antus
Site Admin
Posts: 8365
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: VE V8 Auto to Manual Conversion Programming

Post by antus »

I just did a bit of google searching and turned up 6G1EX55U87L911787 for a 2007 GTS Manual
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
beeradoc
Posts: 9
Joined: Mon Mar 27, 2023 4:50 pm
cars: 67 Chevy C10
12 E3 HSV

Re: VE V8 Auto to Manual Conversion Programming

Post by beeradoc »

Hi guys,

I know this is an older post but hoping one of you guys can shed some insight for me,

I have been asked about programming a ve ute that has calais v8 l98 auto running gear for a manual conversion.

Trying to work out what I need to do before diving in,would I be on the right track with changing vin to a manual vin in all modules, then reprogramming with sps and adjusting ebcm and transmission type in the instrument cluster?

Any help would be greatly appreciated!
Post Reply