Finally got on to using the logger and scripts but I’d like to use the avt to send them on vpw j console, so I can use my j2534 to run the tech 2.
Hoping to simulate a bcm with a script?
Universal patcher logger j console script with avt possible?
-
antus
- Site Admin
- Posts: 8509
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Universal patcher logger j console script with avt possible?
Unless the devs say otherwise or add the scripting engine to the vpw console I dont think that is possible, its J console referring to J2534 protocol and interface is it using.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
04colyZQ8
- Posts: 461
- Joined: Thu Jan 16, 2014 12:41 pm
- cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion
Re: Universal patcher logger j console script with avt possible?
Ok so scripts can be uploaded on other panels but doing so nothing happens or of it does anything I can’t see what it’s sending.
Re: Universal patcher logger j console script with avt possible?
You can send scripts with avt-852 in vpw console. However scripting is active, send and expect a response. What you need is reversed, passive listening for a key trigger and than send a specific message based on trigger. This is not supported yet, Once upon a time we added something similiar but it didn`t worked well enough and got dropped. Source for that might still be in github, if you want to improve it.