V6 ecotec 3800. Tuning ls1 Pcm

[antus]

That'd be great. Just some details of the hardware mods or why they are needed would be interesting even before the bin is done.

[Antwon]

That'd be great. Just some details of the hardware mods or why they are needed would be interesting even before the bin is done.

will do hopefully over the weekend at this stage just confirming its fully functional and the dif is receiving correct bypass signal,

at this stage ive only had to load a v6 4.3l OS to the pcm and wire the engine up using the 2001 express van pcm pinout, its currently drivable, once i have more ill happily share it all

[antus]

So that would mean that you have the low res crank trigger option set and its not running sequential? I think thats fine personally, but this thread is about some kind of hack to keep sequential running with high res trigger enabled which that pcm never did from factory.

[Antwon]

there is a guy in the us using parts from the fwd v6 3800 to still use the seq running his own custom os with new pic up wheels fixed to the balancer in place of the factory ones

[Knackersjewels]

Bumping this, interested in doing it if sequential firing is an option

[Dylan]

Short answer is, Not an option for fuel.