PCMHammer P04
-
- Posts: 20
- Joined: Sun Feb 03, 2019 1:43 am
- cars: 60 ford falcon 07 grand prix 94 chevy swb ls swaped
Re: PCMHammer P04
i have a few of the black box pcm's i can test if any one has the pinout's for them
- antus
- Site Admin
- Posts: 8588
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCMHammer P04
You can see pinouts on page 18 here: https://download.efilive.com/Tutorials/ ... erence.pdf
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 20
- Joined: Sun Feb 03, 2019 1:43 am
- cars: 60 ford falcon 07 grand prix 94 chevy swb ls swaped
Re: PCMHammer P04
Here is the log from the updated version
- Attachments
-
- PcmHammer_userLog_20240813@081230.txt
- (2.55 KiB) Downloaded 146 times
-
- PcmHammer_debugLog_20240813@081230.txt
- (3.11 MiB) Downloaded 141 times
-
- Posts: 20
- Joined: Sun Feb 03, 2019 1:43 am
- cars: 60 ford falcon 07 grand prix 94 chevy swb ls swaped
Re: PCMHammer P04
log and bin from a black box 4 plug the pcm was from 4.3 v6 s10
- Attachments
-
- PcmHammer_userLog_20240813@093443.txt
- (2.19 KiB) Downloaded 157 times
-
- PcmHammer_debugLog_20240813@093443.txt
- (3.1 MiB) Downloaded 157 times
-
- bb.bin
- (512 KiB) Downloaded 159 times
- antus
- Site Admin
- Posts: 8588
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCMHammer P04
Great, thanks. Note your voltage is showing as barely 12v in the first log, and 11.8 in the second. You are likely to have problems at those voltages with erase and write, and should use a power supply or battery that can deliver higher voltage when writing. With 12.5v or so (and about 1 amp of current on tap) both PCMs should be writeable, but as always brick is still possible so dont risk it if you only have 1 pcm and need it for your car.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- antus
- Site Admin
- Posts: 8588
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCMHammer P04
We found a number of early PCMs that were P04 type, that had the early type hardware and 512KiB flash images. PCM Hammer development version was not able to deal with these as half the details matched the early, and half matched the late. We used to call them P04_256k and P04 (meaning late) types, but now we know this is not true I've renamed P04_256k to P04_Early, and documented the hardware types differently and its now working on all P04s that we have been able to test. I think this could mean, P04 is finally done! Here is hopeing nothing else comes up. So, A little bit more testing and maybe solve an edge case on the E54, then PCMHammer 2.0 should be ready.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396