- no workie.png (210.93 KiB) Viewed 3147 times
Vxdiag nano with Tis2000
Re: Vxdiag nano with Tis2000
How do you get TIS 2000 work with tech2win? I just need to do some BCM and radios updates on my 2005 truck. The tech connect line won't change my RPOs so I can't add features to my truck. We need a BCM hammer.
-
- Posts: 643
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: Vxdiag nano with Tis2000
You use tis2000 to program and use the tech2 as a pass thru device. You do NOT use tech2win..
Same problem though, bcm options are not changeable and are determined by vin. Radio's usually have some options back then as far as speaker setups and such.
Same problem though, bcm options are not changeable and are determined by vin. Radio's usually have some options back then as far as speaker setups and such.
Re: Vxdiag nano with Tis2000
you can set the vxdiag nano as a passthrough?
-
- Posts: 643
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: Vxdiag nano with Tis2000
I do not know that answer, I just know what tech2win is not used with sps programming.
If it's a J2534 device then it "should" work with sps programming.
Start tis2000 and try the pass thru option as a device is where I would start..
Re: Vxdiag nano with Tis2000
I know that VXDIAG is a J2534 passthrough device, which is the conclusion I reached from their[url] official website[https://vxdiag.com/].