d1998a dfi module or v6 rodeo module

Converting To Delco ECU From Carby Or Other Injection Systems
User avatar
Vrv8hz
Posts: 37
Joined: Fri Oct 06, 2017 4:33 am

Re: d1998a dfi module or v6 rodeo module

Post by Vrv8hz »

What motor is this mounted to? Do you have space to mount the vn v6 trigger wheels on the front of the crank pulley? With the jackaroo setup, I used a 5mm thick trigger wheel so my feeling is that 1.5mm may be too thin? The vn v6 system is nice to work with on account of the hall effect sensors, but the jackaroo will be fine when you you get past the fussy setup.
Post Reply