Ok so thought i would drop some new pictures of what’s been done. A bit of manual work with the grinder and files ( I am going to try and get the CAD files edited so there is less manual work with the crank sensor bracket).
Bracket hiding behind A/C mount.
And complete setup.
Also coil pack mounted on top of alternator arm.
Tinkers Rides rb30 to delco
- antus
- Site Admin
- Posts: 8538
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Tinkers Rides rb30 to delco
looks good
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Tinkers Rides rb30 to delco
Good place to put the pick up, out of the way.