Just ran across this yesterday - found the old thread at mhhauto when my Techline account got locked last month. I had another TCM I wanted to reflash for a spare so changed the serial and mac address on mine over the weekend and begged to have my account unlocked.
Long story short, if you need to use Techline don't bother trying to change the serial #. My account was locked again after connecting to read the vin. They must have a database of the valid MDI serial #s, or some other method of identifying the clones.
BTW: the uart is RS232 standard signaling so a cheap TTL usb serial adapter wont work.
MDI Clones and Techline
-
- Posts: 634
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: MDI Clones and Techline
Damn!!! Your the first to have that issue.. I have 4 clones with different serial numbers I made up and use them regularly for programming, haven't had my account locked yet.. Keeping my fingers crossed..
Re: MDI Clones and Techline
spfautsch, are you sure the serial got changed, as requested by techline.
Re: MDI Clones and Techline
Ive just got a couple of adapters that have arrived to try make a cable to interface with the mdi, ive just been using my autel vcmi or openport when using techline for now, but damn they are slow compared to the mdi clone. Thinking of making a dummy account to try when I figure out how to change the details.
Rang my local GM dealer to enquire about buying a genuine mdi2 but they refuse to order one in for me as techline is not allowed to be accessed by the public in my country - we have no right to repair laws at all so even basic service info is not available.
Rang my local GM dealer to enquire about buying a genuine mdi2 but they refuse to order one in for me as techline is not allowed to be accessed by the public in my country - we have no right to repair laws at all so even basic service info is not available.
-
- Posts: 634
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: MDI Clones and Techline
GM can't sell you an MDI2 if they wanted to, they had some sort of falling out with Bosch. Even working at a GM dealer I have to go to Bosch directly. GM sent an email out stating this. I can tell you that I just ordered one thru the email, email to set up the purchase and then called in the card details. Price is a bit fuzzy since they stated one price, invoice said another price, yet the card was dinged for a different price.. I'll see what it ends up being, not supposed to see it for another 10 days or so. Sounds like they are using the gm parts model of just in time production, wait until you have a bunch, then crank out the assembly line. Can't have any sitting on the shelf.
Reference Number: GCUS-9-16652
MDI2 Scan Tool Ordering Update
The MDI2 Scan Tool is orderable by contacting Bosch at https://gmmdi.service-solutions.com/ or by contacting Bosch directly at KM@service-solutions.com.
The MDI2 is NOT orderable by contacting Snap-on on the new GMGlobaltools.com website. The MDI2 is developed and sourced through Bosch.
For service or questions regarding an MDI2 please contact Bosch at KM@service-solutions.com.
Reference Number: GCUS-9-16652
MDI2 Scan Tool Ordering Update
The MDI2 Scan Tool is orderable by contacting Bosch at https://gmmdi.service-solutions.com/ or by contacting Bosch directly at KM@service-solutions.com.
The MDI2 is NOT orderable by contacting Snap-on on the new GMGlobaltools.com website. The MDI2 is developed and sourced through Bosch.
For service or questions regarding an MDI2 please contact Bosch at KM@service-solutions.com.
-
- Posts: 634
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: MDI Clones and Techline
Yes, that is Bosch.. Yup the price of $735.70 is what it said on the invoice but I was quoted $790.70. And finally my card was dinged for $850ish.. I guess some of that is a pre-auth which will 'fall off' plus a tax which I shouldn't have to pay so I'll have to wait and see what the final bill is..kur4o wrote: ↑Mon Nov 04, 2024 10:05 pm Did you checked this link
https://gmmdi.service-solutions.com/Ite ... L-52100-AM