TX3 project
-
antus
- Site Admin
- Posts: 8650
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: TX3 project
Good to know you have that as a backup plan if you cant get a signal that works for the 6+1 in the space provided, too.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: TX3 project
- Delco 6+1
- images.jpeg-1.jpg (33.6 KiB) Viewed 461 times
Re: TX3 project
New old stock 1927a module arrived today from the US. Ran it with power and signal from the crank 6+1 while the camira dizzy was still connected. Good spark across both coils. Then i tried the previous 1927a, definitely faulty only triggering one of two coils.
Then I ran the spark leads to the new 1927a and It ran smooth on 10degrees with the dizzy still talking to the ecu for fuel.
Then I ran the spark leads to the new 1927a and It ran smooth on 10degrees with the dizzy still talking to the ecu for fuel.
- Attachments
-
- 20250124_153413.mp4
- (9.69 MiB) Downloaded 3 times
-
- 20250124_153057.mp4
- (7.08 MiB) Downloaded 2 times