Help needed with Comms board & nvram

Tuning The Delco In Realtime
User avatar
Clifford3800
Posts: 7
Joined: Sun Jan 26, 2025 6:14 am
cars: VP ls1 sedan, VP v6 ute, 1965 2A landrover.

Re: Help needed with Comms board & nvram

Post by Clifford3800 »

No luck with accessing the 2nd bin this arvo. I'll get a programmer when I have the funds and sort this out.

On the 2nd bin it would not even connect to data acquisition like it would on the 1st bin.

Starting to feel like I'm in over my head with this purchase :typist:

Thanks again for your help guys
Also have to give a shout out to vlad for for helping me.

Once I get a programmer I'll be back on this post.
User avatar
Clifford3800
Posts: 7
Joined: Sun Jan 26, 2025 6:14 am
cars: VP ls1 sedan, VP v6 ute, 1965 2A landrover.

Re: Help needed with Comms board & nvram

Post by Clifford3800 »

:comp:
User avatar
antus
Site Admin
Posts: 8700
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Help needed with Comms board & nvram

Post by antus »

if it connects to data aquisition on the first bin its not bricked.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Clifford3800
Posts: 7
Joined: Sun Jan 26, 2025 6:14 am
cars: VP ls1 sedan, VP v6 ute, 1965 2A landrover.

Re: Help needed with Comms board & nvram

Post by Clifford3800 »

Read the bottom of my first post. Was able to connect data only but readings are not accurate. This before the I found that the ecu was missing the WR wire on back side of circuit board.

Not really sure what to do now
User avatar
antus
Site Admin
Posts: 8700
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Help needed with Comms board & nvram

Post by antus »

Ok, I just saw the error connecting bit, I read in more detail now.

It sounds like echo setting in OSE plugin is not right or you have the wrong ADX. Can you post a screenshot of what it looks like while its logging and tell us what ADX you're using, and the settings you have in OSE Plugin?

"also, any links to delcohacking take me to bellet.net which does not seem right. there's a fair few links to delcohacking on the instructions im reading through."

Good spot. I have killed delcohacking.net as I dont have a https certificate for it and so it was throwing warnings and google was indexing it and sending people there instead of here. I did a search and replace across the forums to update links, but I never thought to check the PDFs for the NVRAM. I'll do that. In the mean time you can use the FAQ area (the green ? in the top right, or in my signature below my post) which has links to same places, but pointing to pcmhacking.net.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply