Coil Pack Testing

Information and discussion of EFI hardware and specifications
User avatar
antus
Site Admin
Posts: 8896
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Coil Pack Testing

Post by antus »

Cool, thanks for the update!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Gareth
Posts: 2595
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: Coil Pack Testing

Post by Gareth »

May 2025 update, after also running the Gorst coils on a daily for 4 years straight had no issues.

The son's speedway car had a coil failure on the weekend, pulled the Gorst coils off the old daily and ran with them, no drivability issues but did notice that the electricity seems to be leaking :lol: :lol:
IMG_5186.jpeg
After going on the hunt last night for others it seems that Gorst coils are no longer?
According to chemistry, alcohol is a solution...
User avatar
vlad01
Posts: 8107
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: Coil Pack Testing

Post by vlad01 »

Has anyone tried NGK ones? I suggested them to my nephew and he's had them for about a year or maybe 18 months, he killed about 3 sets of genuine prior, used and new over a couple of years. So far so good. The thing I like about the NGK is they are water proof in the installed condition.

The posts and body are all moulded as one piece, not the two most brand including genuine do. (the parting line around the base of the post), so when water gets on them, they don't die instantly, not at all in fact as it should be.

Long term, no idea if they are good, if the rep of their plugs and O2 sensors are anything to go by, probably not that long but so far better than Delphi for sure.

Also the terminals are brass and not just tinned steel, so no rust from the ozone and/or moisture if that happens to get in.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
The1
Posts: 4793
Joined: Mon Jan 04, 2010 10:23 am

Re: Coil Pack Testing

Post by The1 »

The Delphi coils are good, not as good as the old gorst coils but still good.
User avatar
vlad01
Posts: 8107
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: Coil Pack Testing

Post by vlad01 »

We've had multiple Delphi coils die in short order, same with their DFI modules.

I try to stick with good used for the DFI as they are AC Delco units, and so far I have seldom had to change the factory genuine AC Delco coils, most often from corroded terminals or accidental water damage.

But once my nephew's VS ran out of genuine old coils, the new replacement Delphi ones just died quick. We put the NGK ones on, and they have not failed since, but more data points than just his would be good to see.


I have some NOS AC Delco "L67" coils stashed for that stashed project car one day. So if I even run out of good used which I nearly have, mainly donating them to my nephew, I'll go the NGK.

I think I may have opted for the NGK because I couldn't find Gorst ones? This was maybe 18 months ago? I just wanted something that was more expensive and not the 10-15 bucks like most of the no names flooding ebay, NGK were the only ones that fit the apparent higher quality bracket.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
The1
Posts: 4793
Joined: Mon Jan 04, 2010 10:23 am

Re: Coil Pack Testing

Post by The1 »

No fails here that i know of yet, Split coil packs or outside shorting like in the picture above?

I have my test setup still here somewhere could update for NGK if someone sent me one.
Post Reply