vr v8 ecu to run fans a/c and l3 dash only

Converting To Delco ECU From Carby Or Other Injection Systems
Post Reply
1agross
Posts: 10
Joined: Fri Feb 25, 2011 12:35 pm
cars: vr ss sedan
eh holden sedan

vr v8 ecu to run fans a/c and l3 dash only

Post by 1agross »

hi all i bought a vr v8 bt1 manual which had a fire in the engine bay it destroyed the wiring and engine i pickup a come racing carby 383 crate motor its all installed i want to run the electric fans, air con and level 3 dash through the computer can this be done any help would be great thankyou
1agross
Posts: 10
Joined: Fri Feb 25, 2011 12:35 pm
cars: vr ss sedan
eh holden sedan

Re: vr v8 ecu to run fans a/c and l3 dash only

Post by 1agross »

hi all i need help wiring up my vr bt1 v8 manual im running a carby and accel dissy with inbuilt module i want to keep the ecu running for everything minus dissy,module,tps,iac how will i go about it.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: vr v8 ecu to run fans a/c and l3 dash only

Post by delcowizzid »

not really doable you need ignition module for delco ecu out of a camira for a start and really need the injectors doing fuel for it to know how much its using .you could just fudge a ve map so it reads but it will never read right
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
1agross
Posts: 10
Joined: Fri Feb 25, 2011 12:35 pm
cars: vr ss sedan
eh holden sedan

Re: vr v8 ecu to run fans a/c and l3 dash only

Post by 1agross »

can you just trick the ecu to think its running
Post Reply