Difference between Getrag VSS and T5 VSS?
Re: Difference between Getrag VSS and T5 VSS?
other than test1,2,3 the other flags are the same as before. maybe load a stock bin up to test and check it doesn't work.
-
- Posts: 152
- Joined: Mon Jul 04, 2011 8:37 pm
- cars: 2000 HSV VS Series 3 Maloo
1995 Holden VS V6 3 seat ute (bunky)
1997 Holden VS S Pak Ute (wreck) - Location: SOR, WA
Re: Difference between Getrag VSS and T5 VSS?
Yep, all I did this morning was to load the new XDF into TP, connect to the PCM, download bin from emulator, Opened up the Man Trans, HiResVSS and Test flags. Set the HiRes flag so everything was checked to start from, went for a drive up the street and all read correctly. On the way back I was unchecking the Test flags one by one to see if that made a difference.
Load a stock bin to TP?
Load a stock bin to TP?
Re: Difference between Getrag VSS and T5 VSS?
not sure what's going on, id try a clean bin, verify it doesn't work again, then say untick test2 and see what happens.
-
- Posts: 152
- Joined: Mon Jul 04, 2011 8:37 pm
- cars: 2000 HSV VS Series 3 Maloo
1995 Holden VS V6 3 seat ute (bunky)
1997 Holden VS S Pak Ute (wreck) - Location: SOR, WA
Re: Difference between Getrag VSS and T5 VSS?
I figured out what was happening, and am kicking myself... I was clicking initialize emulator not enable emulation, so changes I was making in TP weren't going into the NVRAM
My apologies!
All working with HiRes VSS unchecked.
Troy
My apologies!
All working with HiRes VSS unchecked.
Troy