GM E78 and E39 ECUs
GM E78 and E39 ECUs
I'm trying to get into a GM/Delphi E78 ecu with a FreeScale MPC5566 cpu. Evidently it has a jtag interface on the board. I have a P&E Micro Multilink jtag interface that supports this cpu. But can anyone help on pin outs for the jtag port and benchtop power to the ecu? Or any other info (code disassembly, harness pins, etc). My guesses are at: http://code.google.com/p/open5xxxecu/downloads/list
Last edited by jonr on Sun Apr 22, 2012 9:12 pm, edited 1 time in total.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: GM E78 and E39 ECUs
Cant help on the JTAG but very cool DIY ECU!
Re: GM E78 and E39 ECUs
Thanks. IMO, patching binary code can only take you so far. You get complete flexibility when you replace all of the firmware with your own logic.
-
- Posts: 81
- Joined: Sun May 11, 2014 6:36 pm
- cars: Z06
Re: GM E78 and E39 ECUs
And that will take you years to learn. Schematics you do not have nor will get to be able to code it all.... The best base code is what you have and has been optimized for the hardware and intended purposes.
-
- Posts: 159
- Joined: Fri Aug 25, 2017 5:28 pm
- cars: liberty gen 5
- Location: Adelaide
Re: GM E78 and E39 ECUs
Did anyone ever get the JTAG pin outs for this ECU? I'd love to get a diagram for it.
Re: GM E78 and E39 ECUs
Is there a JTAG header on the ECU?julespatch wrote:Did anyone ever get the JTAG pin outs for this ECU? I'd love to get a diagram for it.
Otherwise it requires reverse engineering where all the pinouts go... usually meaning sacrificing an ECU for learning purposes.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726