Memcal ID Tool with Data Version 1.10

Programs / Tools / Scripts
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Memcal ID Tool with Data Version 1.06

Post by antus »

what ecu is it? I see a delco branding on that chip, but the older rodeos with the 4ze1 are a hitachi ecu yet they still talk aldl (though I saw that on the circuit diagram, and have not tried it). not sure exactly what the relations are there.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Memcal ID Tool with Data Version 1.07

Post by The1 »

Been a while but have updated Memcal id tool, updated some bin detection information.

I have also separated the tool from the bin/xdf data as the data folder xdf's are now most likely to be updated more than id tool.

So i have updated the bins/xdf's to current versions available.
0081(2)
Posts: 149
Joined: Wed Oct 31, 2012 6:59 pm
cars: VY commodore supercharged V6
Location: Sydney

Re: Memcal ID Tool with Data Version 1.07

Post by 0081(2) »

Was just trying to check a PCM and it keeps coming up as not found the service number is 09356445 can someone try and run it and see if they get a different result??
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Memcal ID Tool with Data Version 1.07

Post by VX L67 Getrag »

you might need to post the bin for anyone to check it?
0081(2)
Posts: 149
Joined: Wed Oct 31, 2012 6:59 pm
cars: VY commodore supercharged V6
Location: Sydney

Re: Memcal ID Tool with Data Version 1.07

Post by 0081(2) »

Just got it in the mail today ill have to get put it in the car and get a read, don't have a test bench.
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Memcal ID Tool with Data Version 1.07

Post by VX L67 Getrag »

445 is just the generic service no. for vx-vy flash pcm so it depends on the 4 digit code, but can still be any type flashed to it if it's been played with!
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Memcal ID Tool with Data Version 1.08

Post by The1 »

Updated memcal id tool to 1.08, added the following bins to the data pack. Also added and update the generic xdf's.

AXFX0842
BHNW5710
CNPH3172
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: Memcal ID Tool with Data Version 1.08

Post by Dylan »

Thanks mate,I find this tool quite handy and use it often. I have a noticed a few bins getting around that weren't on this program. If i find anyomre I'll let you know.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Memcal ID Tool with Data Version 1.08

Post by The1 »

that was the original intent, one place, all the info and bins/xdf's, send them over if you get any and ill keep adding them.
User avatar
DieselBob
Posts: 164
Joined: Sun Mar 28, 2010 5:43 pm
cars: Vr SII Ute
Location: Brisbane QLD

Re: Memcal ID Tool with Data Version 1.08

Post by DieselBob »

Thanks :thumbup:
Makes it so easy
Post Reply