The flashtool is here .. https://pcmhacking.net/forums/viewtopic.php?f=3&t=82
Try turning off the thermo while the key is on and see if the errors stop.
Logging Errors In TunerPro
- commo_carl
- Posts: 19
- Joined: Mon Jun 03, 2013 9:18 pm
- cars: VR V6 Turbo Ute
NA6 MX5 - Location: Sydney, NSW
Re: Logging Errors In TunerPro
Hey fellas, just found the problem!
My previous wideband (14point7 spartan) used the ecm ground as its ground, and worked fine. So when I wired my aem in I did the same.
So I unplugged the w/b earth connection to ecm as a pure hunch and it fixed it. So I am stoked.
Maybe this will help someone else out in the future lol
Thanks for all the responses guy. This forum is great
My previous wideband (14point7 spartan) used the ecm ground as its ground, and worked fine. So when I wired my aem in I did the same.
So I unplugged the w/b earth connection to ecm as a pure hunch and it fixed it. So I am stoked.
Maybe this will help someone else out in the future lol
Thanks for all the responses guy. This forum is great
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Logging Errors In TunerPro
Thanks for getting back with the solution, hopefully can now get some useful info from the ECU.
Holden202T wins the prize* for picking the issue!
* There is no prize
Holden202T wins the prize* for picking the issue!
* There is no prize
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Logging Errors In TunerPro
The prize is being able to help someone out!!
Good to see its sorted!! I've had my fair share of wiring issues I know how annoying they can be!!
Good to see its sorted!! I've had my fair share of wiring issues I know how annoying they can be!!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread