bricks vp build soon to be twin turbo

[Holden202T]

ok so it was in the loom and the memcal has the knock filter on it ... be interested to see if the tune on the memcal is factory one and if knock sensor is enabled on it or not

[dbrickz]

i will see if i can work out how to use this pos programmer and upload it

[dbrickz]

well i hope this is right

[ejukated]

The file is corrupt. Possibly bad connection or wrong settings in the programmer

[VL400]

A standard BPMN bin uses a knock sensor. So unless the silver sticker looks to have been removed it should be still enabled. Can also cross reference the filter code (1F6052) here .. https://pcmhacking.net/forums/viewtopi ... pmn#p13685

[dbrickz]

The sticker dont look like its been removed what else i find odd after reading
your post VL400 is the memcal thats in my commo now is identical bpmn but no knock filter... The doner car it cum from
Ran a gas set up i no the memcal had been tuned by gas research... Wonder why it has no filter

[dbrickz]

Exhaust flanges turned up today