Information and discussion of EFI hardware and specifications
vlad01
Posts: 7803 Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S VP I executive VP II executive VP II executive #2 VR II executive
Location: Kyneton, Vic
Post
by vlad01 » Fri Nov 08, 2013 4:53 pm
immortality wrote: Bahhh, I was never fan of the Walkinshaw model, to much body kit for me, wouldn't mind getting hold of the intake manifold though, there still isn't much better for an EFI Holden V8.
Just read the bin and upload it here on the website.
yeah I thought it was one of those models where people pinch parts from it to use for their projects.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
eckermannk
Posts: 50 Joined: Thu Jun 27, 2013 10:05 am
cars: Torana LH VN 5.0
Post
by eckermannk » Fri Nov 08, 2013 5:11 pm
im just gunna pinch the knock board. Ill send the chip onto anyone who has the capability to get the tune out of it and put it up on the forum.
VL400
Posts: 4991 Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:
Post
by VL400 » Fri Nov 08, 2013 6:17 pm
If the silver sticker stuck to the EPROM in the memcal is AMBX6968 then the bin is in the MemcalID tool
eckermannk
Posts: 50 Joined: Thu Jun 27, 2013 10:05 am
cars: Torana LH VN 5.0
Post
by eckermannk » Thu Nov 14, 2013 1:57 pm
The Delco sticker is AMBX7274
immortality
Posts: 3426 Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX
Post
by immortality » Thu Nov 14, 2013 2:13 pm
That is a new one. Definitely need to get that read and posted on the website.
eckermannk
Posts: 50 Joined: Thu Jun 27, 2013 10:05 am
cars: Torana LH VN 5.0
Post
by eckermannk » Thu Nov 14, 2013 3:16 pm
Quite happy to send it to someone that is capable to do it. Could I do in myself with the setup i have?
eckermannk
Posts: 50 Joined: Thu Jun 27, 2013 10:05 am
cars: Torana LH VN 5.0
Post
by eckermannk » Thu Nov 14, 2013 3:20 pm
Knock sensor and board installed
Now what parameters do i need to switch and and setup?
Map A: set=Knock logging enabled. = SET
Any others
antus
Site Admin
Posts: 8253 Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam TX Gemini SR20 18psi Datsun 1200 Ute Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:
Post
by antus » Thu Nov 14, 2013 6:16 pm
I can read AMBX from the chip, pm sent.
delcowizzid
Posts: 5493 Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:
Post
by delcowizzid » Thu Nov 14, 2013 6:38 pm
set ESC params - Coolant temp enable in scalers to a lower temp 40 degrees or something
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem