Delphi MAF 25168491 SOLD
Delphi MAF 25168491 SOLD
Genuine Silver badged Delphi MAF, This is a used unit, i have cleaned and tested. Good for around 11400hz
$90 + Post
$90 + Post
Re: Delphi MAF 25168491
is this as seen on stock ls1? or is bigger?
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Delphi MAF 25168491
I believe this is as seen on LS2 & possibly L76/L98 but they are 1's that are hard to find & there's a lot of knock off's that don't have the higher Hz scale!
Re: Delphi MAF 25168491
there used on VZ V8's i think, but this was from the US Chev Tahoe use them. I got 2 in from the US to retest after the AU ones were found to be limiting to 11,500hz or around there, seems these do as well, was just a brand new one that went to 14,000hz perhaps a revision in the new ones and they can read higher but seems anything used i have tested or anyone else so far is limited to around 11,500hz, the plastic acdelco ones are heading around the same limitation as well.
Re: Delphi MAF 25168491
so I would need an adapter loom to use this on my ls1 as well?
Re: Delphi MAF 25168491
LS1 has 3pin MAF and 2 pin IAT?
Re: Delphi MAF 25168491
You will need the joiner to 5 pin, same as the ones i have for sale but has different MAF plug, ive just put up a post in enhanced thread about which plugs fit which maf's.
http://pcmhacking.net/forums/viewtopic. ... 129#p38129
http://pcmhacking.net/forums/viewtopic. ... 129#p38129
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Delphi MAF 25168491
Sorry don't want to confuse things but LS1 maf's actually only have the 3 pin plug with IAT seperate, from what I've worked on anyway!
Re: Delphi MAF 25168491
which is exactly what The1 meant... 3 pin Maf plus separate 2 pin IAT...