VS-VY Enhanced Factory Bins
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Enhanced Factory Bins
No, as explained via email that issue is from the very early prototype hardware you are trying to use that has soldered jumper wire to select the PCM type. From memory, which is sketchy being about 4 or 5 years ago, yours is hardwired for vt which causes ram data read errors on vs.
Re: Enhanced Factory Bins
good work Ant at keeping things bug free!
Re: Enhanced Factory Bins
sorry for lack of updates, work is very very busy, so i wont be touching any code for some time, not sure till when at the moment.
There should be a couple of versions come out of beta soon but they are 99% done anyway. VT/VX V6 Supercharged with Full EOI tables and VS V6 Supercharged with all the goodies will be out soon.
There should be a couple of versions come out of beta soon but they are 99% done anyway. VT/VX V6 Supercharged with Full EOI tables and VS V6 Supercharged with all the goodies will be out soon.
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Enhanced Factory Bins
I Know someone out there is trying to hack up a VY auto calibration to suit manual so here is a bin I edited that should be the same as all the existing 92118883 enhanced but to suit factory manual...
please test carefully first!
please test carefully first!
- Attachments
-
- 92118886 Enhanced VX L67 Getrag TEST.bin
- (128 KiB) Downloaded 325 times
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Enhanced Factory Bins
If anyone can't test & reply back that it works o.k. then I can do the same thing for $BD to make a matching bin!
I really need to sort out my jimstim to be able to bench test the later pcm's, I even got a tinyos to flash it but need to look into again!
I really need to sort out my jimstim to be able to bench test the later pcm's, I even got a tinyos to flash it but need to look into again!
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Enhanced Factory Bins
Not to be pushy but has anyone been able to test on a stock car or bench setup to make sure I didn't screw up the enhanced code copy over?
As I said if it worked o.k. then I will do the same mod for $BD file, then the next flash type setup to do would be $06b for the later 2004 euro emission styled calibration but thats beyond a copy enhanced code I think.
As I said if it worked o.k. then I will do the same mod for $BD file, then the next flash type setup to do would be $06b for the later 2004 euro emission styled calibration but thats beyond a copy enhanced code I think.
Re: Enhanced Factory Bins
vs v6 supercharged enhanced bin version 1.0 released with all the extras, have fun.
Re: Enhanced Factory Bins
Are there any plans to add CYLAIR mods and RT editing to the flash PCMs? I expect some sort of rewiring would be needed after removing the flash chip to replace with an SRAM
Re: Enhanced Factory Bins
Currently i am adding the new cylair code and tables to VY N/A Flash, but really dont have spare time atm due to single income.
-
- Posts: 5
- Joined: Mon Oct 15, 2012 10:04 pm
- cars: Twin turbo LSX VK
1960 Belair
Escort sports sedan
VT 5l powered 2002 econovan - Location: Dandenong
- Contact:
Re: Enhanced Factory Bins
Anyone else have any tracing issues with VY L67? it will trace the rpm column but not follow load, ie it just traces up and down the left hand column.
The adx im using is VX sc tp5 1.1 as its the only one i can find that does not drop out. All the VY V6 SC %2407 adx files are not working for me.. they just error out.
adx source:
http://pcmhacking.net/forums/viewtopic. ... =700#p8371
Tried this flash based ADX (knew it was wrong) but no go. (VX Engine and trans TP5 V104 yoda69 edition)
The adx im using is VX sc tp5 1.1 as its the only one i can find that does not drop out. All the VY V6 SC %2407 adx files are not working for me.. they just error out.
adx source:
http://pcmhacking.net/forums/viewtopic. ... =700#p8371
Tried this flash based ADX (knew it was wrong) but no go. (VX Engine and trans TP5 V104 yoda69 edition)