V6 Holden Datsun Coupe

[v6bucket]

Here some pics from Warwick 6 Banger Nats & details of my mates car that I help him with.
2 door Datsun coupe
series 1 V6 Holden with approx.300000km on the motor
SC 14 Toyota blower @ 15psi boost
T5 transmisssion
Bluebird diff
26x8.5 slicks
ET 7.9 @ 86mph(1/8th)

[Holden202T]

if i am not mistaken that is the same datto that is in the latest street machine and did alright in a burnout comp ?

looks like it fits in .... just!

has it been dynod ? i'd be interested to know what sorta power they make with the sc14 and 15psi.

has anything been done to the blower ? i have heard you need to be careful spinning them too quick or the teflon coating comes off the rotors .... i have one of these blowers but never got around to doing anything with it yet!

[v6bucket]

Yes you are right, thats it in Street Machine. It is very tight, but there is still room. He had it on a dyno several months ago,but it ran lean so the operator backed off, it made 225hp @about 4000rpm. He has since fitted 010 Bosch pump, but hasn't run it since, also needs a new set of slicks since Warwick. The blower is std.

[Holden202T]

thats not bad, be interested to see the dyno once it can rev right out!