OSE 11P V104

For discussion and distribution of custom code and hacks
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: OSE 11P V104

Post by VL400 »

Have updated the zip in the first post.

The XDF now has some levels set, level 1 being basic engine stuff and level 2 some boost related items.

The logger ADX works thanks immortality :thumbup: I have removed the doubled up analog inputs you had with one for the logger and one for TP5, the logger can use the same one as TP5. Also added a couple of others I have been using.

Added a couple of extra bits of info to the PDF that got missed - temp sensor calibration, dwell control, pressure switch manifold decoding and solenoid states all got moved to the calibration area instead of hardcoded.

Added a wiring guide from VX L67 Getrag, it can be used when converting a VS V6 to run a '424 PCM and 11P. Thanks :thumbup:
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: OSE 11P V104

Post by Holden202T »

that's the go, can hide all the boost stuff if your running N/A! :)
v8-tuning
Posts: 182
Joined: Mon Mar 19, 2012 7:46 pm
cars: 304 commodore

Re: OSE 11P V104

Post by v8-tuning »

Credit to you guys, looks great!
Only had a quick look but very impressed.
I'm going to be putting a turbo setup on my vs 304 soon and was wondering what to use.
Wasn't a lot of options only kalmaker and ls1 ecu setup $$$$$ for vr/vs 4l60e's.
This will give people a much better option when going forced induction.
hoosedamoose
Posts: 66
Joined: Thu Nov 14, 2013 9:44 pm
cars: vs statesman

Re: OSE 11P V104

Post by hoosedamoose »

Good stuff VL400! you've nailed it once again! I love how all the stuff are ordered in categories, Makes it soooooo much easier to see where everything is :D
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: OSE 11P V104

Post by hsv08 »

Will this work on the VT? Would love to go map.
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: OSE 11P V104

Post by VL400 »

Yes and no. While 11P does support some VT PCM functions it does not support all of them, the VR PCM does not have enough inputs to allow everything.

There is limited instrument cluster support, other than an oil pressure light (the VT PCM sends this to the dash normally) you get most other important things. the 11P code listens to the vehicle bus and will respond to the BCM requesting the instrument cluster data to be sent to the dash
There is no VT VATS in 11P.
11P cannot respond to airbag deployed status messages, so it wont cut the fuel pump like a VT PCM will if the engine was still running after the prang. It still cuts the fuel pump on engine stall.

It does enough to keep a VT fairly happy. I know of one user running 11P on a VT .. http://pcmhacking.net/forums/viewtopic.php?f=9&t=3818
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: OSE 11P V104

Post by hsv08 »

Thanks VL400. I will keep watching the progress of it and may look into using it in the future.
Thanks
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: OSE 11P V104

Post by VL400 »

Its unlikely to get much more VT-VY related features. There are too few people wanting it, and most other things require inputs and/or outputs which the '424 PCM is very short of.
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: OSE 11P V104

Post by krusty »

Hi all

Noob question coming your way

I'm on the dyno with a 304 using BLCC stacked $11P. Tracking bubble is good but trying to upload to emulator gives a red flashing upload failed on the bottom of the screen

Something simple no doubt but please tell me what I'm doing wrong or where to look in settings so it uploads correctly
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: OSE 11P V104

Post by krusty »

Only my 1st time with $11P btw. I like what I see and hope to use it more :thumbup:
Post Reply