I've got everything I use from VL400 and the newer stuff from Antusdelcowizzid wrote:haha must need the write line wire added under the ecu main board or write protect jumper is on i presume you using your own gear LOL
OSE 11P V104
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: OSE 11P V104
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: OSE 11P V104
oh sweet least we found the issue LOL go get soldering or unjumpering LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: OSE 11P V104
Soldering on the 424? Unsure where to target as Ive got no info for that
This is my jumper config
This is my jumper config
- Attachments
-
- image.jpg (1.24 MiB) Viewed 17165 times
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSE 11P V104
There is a pic in the NVRAM instructions on where to solder the wire to the '424 PCM. Like the '808 it needs a wire added to the PCB.
Let me know if you dont have the PDF and can send you a pic.
Let me know if you dont have the PDF and can send you a pic.
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: OSE 11P V104
Please semd me a pic mate. the drop box from ages ago is no longer workingVL400 wrote:There is a pic in the NVRAM instructions on where to solder the wire to the '424 PCM. Like the '808 it needs a wire added to the PCB.
Let me know if you dont have the PDF and can send you a pic.
Thanks
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: OSE 11P V104
Sent you a PM with the instructions.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: OSE 11P V104
jumpers look wrong .on 6 cylinder and no write enable jump
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: OSE 11P V104
Yep, just picked that lol. Lucky it's nothing more than idle n was on stoicdelcowizzid wrote:jumpers look wrong .on 6 cylinder and no write enable jump