OSE 11P V104

For discussion and distribution of custom code and hacks
Post Reply
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: OSE 11P V104

Post by krusty »

delcowizzid wrote:haha must need the write line wire added under the ecu main board or write protect jumper is on i presume you using your own gear LOL
I've got everything I use from VL400 and the newer stuff from Antus
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: OSE 11P V104

Post by delcowizzid »

oh sweet least we found the issue LOL go get soldering or unjumpering LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: OSE 11P V104

Post by krusty »

Soldering on the 424? Unsure where to target as Ive got no info for that

This is my jumper config
Attachments
image.jpg
image.jpg (1.24 MiB) Viewed 16812 times
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: OSE 11P V104

Post by VL400 »

There is a pic in the NVRAM instructions on where to solder the wire to the '424 PCM. Like the '808 it needs a wire added to the PCB.

Let me know if you dont have the PDF and can send you a pic.
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: OSE 11P V104

Post by krusty »

VL400 wrote:There is a pic in the NVRAM instructions on where to solder the wire to the '424 PCM. Like the '808 it needs a wire added to the PCB.

Let me know if you dont have the PDF and can send you a pic.
Please semd me a pic mate. the drop box from ages ago is no longer working

Thanks
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: OSE 11P V104

Post by VL400 »

Sent you a PM with the instructions.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: OSE 11P V104

Post by delcowizzid »

jumpers look wrong .on 6 cylinder and no write enable jump
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: OSE 11P V104

Post by krusty »

delcowizzid wrote:jumpers look wrong .on 6 cylinder and no write enable jump
Yep, just picked that lol. Lucky it's nothing more than idle n was on stoic
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: OSE 11P V104

Post by krusty »

Mistakes are fine as long as we learn from them haha
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: OSE 11P V104

Post by krusty »

Thank you good fellow insomniacs :D
Post Reply