New Delco Tool

A place For General Chit Chat Etc
Post Reply
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

New Delco Tool

Post by antus »

Great new multipurpose tool discovered at the local pub, of all places! :D

Seems to have limited reprogramming options unfortunately, but can be used stock .
delco_tool.jpg
delco_tool.jpg (122.88 KiB) Viewed 3595 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: New Delco Tool

Post by delcowizzid »

hahahaha does it have a proven increase in eating performance using this fork am i gonna get better 0-full times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: New Delco Tool

Post by antus »

Well, its a pretty good fork, but will only work within the original specs. I went searching for pre-existing mods, but all I could find was this ricer kit.
Flashing-Fork-18302911171.jpg
Flashing-Fork-18302911171.jpg (23.87 KiB) Viewed 3589 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: New Delco Tool

Post by Holden202T »

you got too much spare time man :)
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: New Delco Tool

Post by VL400 »

Thats a quality fork! haha Nice find.
Post Reply