Hello everyone,
first of all I am glad to have found this forum, wish I could have found it earlier. I need wiring diagrams for bcm, pim and pcm. The pim has a total of 10 wires and is a small black box. Guys please if anyone can help I would really appreciate and be thankful.
Regards
2005 VZ V8 PCM BCM wiring
-
- Posts: 3
- Joined: Mon Mar 14, 2016 4:56 pm
-
- Posts: 88
- Joined: Thu Oct 07, 2010 10:45 pm
- cars: VR Ute with VS V6 Getrag driveline
VE SSV Ute
VS Ute - Location: Campbelltown NSW
Re: 2005 VZ V8 wiring
These will help, they are for a ute, but mostly the same anyway.
-
- Posts: 3
- Joined: Mon Mar 14, 2016 4:56 pm
Re: 2005 VZ V8 wiring
Thanks a lot, you made my day. A question: on the PIM the wire on #13 is yel/red but in the diagram it says OG. Can you check please where does the #13 (yel/red) wire go to. Once again thanks
-
- Posts: 88
- Joined: Thu Oct 07, 2010 10:45 pm
- cars: VR Ute with VS V6 Getrag driveline
VE SSV Ute
VS Ute - Location: Campbelltown NSW
Re: 2005 VZ V8 wiring
Looks like 2WD/4WD indication. 12v ignition feed. I would assume the 12v ign feed to Pin X13 would indicate 2WD.
-
- Posts: 3
- Joined: Mon Mar 14, 2016 4:56 pm
Re: 2005 VZ V8 wiring
Thanks a ton...