Hi there.
I'm very new to this Delco tuning. I have a VY and apart from needing the burner and eraser, what else will I need?
I'm a Mechanic by trade so I know my way around cars, just not the computers for the Holden's. Fortunately at work, we do alot of Turbo ford tuning, mostly XR6 turbo's, so I have another set of brains on hand to knock heads with about fuel and spark tables, and also have access to a Dyno!
I have just downloaded TunerPro and it looks very similar to the ford software in some respects.
I have read some other posts but cant really decipher what I will need for the VY . She is a stock auto at the moment.
Still trying to work out why they don't have a plug and play tuning device yet!!
Any help would be much appreciated
New to this....
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: New to this....
Welcome to the forums. Is the VY NA or super 6?? If its NA then download this and you can read and write to the PCM without anything but an ALDL interface.
Re: New to this....
Hi VL400, its an NA, much to my disgust but it will do for now. ALDL meaning the plug near the PCM or just and OBD connector (diagnostic plug)VL400 wrote:Welcome to the forums. Is the VY NA or super 6?? If its NA then download this and you can read and write to the PCM without anything but an ALDL interface.
-
- Posts: 105
- Joined: Tue Jul 06, 2010 2:04 pm
- cars: VH, VK, VS, VU
Re: New to this....
If im not mistaken its the ALDL plug for diagnostics, but it reads out in a OBDII format.
Re: New to this....
Im not sure if the VY has the ALDL plug like the VN-VS etc or if it just has the OBD2 plug, iv never looked. So what cable do I actually need?Streetholden wrote:If im not mistaken its the ALDL plug for diagnostics, but it reads out in a OBDII format.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: New to this....
Using the OBD/Diagnostic connector, its OBD-II style connector but the data is OBD-I. Any ALDL interface will do, can get them from here if you want..
RS232 .. https://pcmhacking.net/forums/viewtopic.php?f=14&t=396
USB .. https://pcmhacking.net/forums/viewtopic.php?f=14&t=164
Information regarding using the flashtool with the VX and VY flash PCMs can be found here ... https://pcmhacking.net/forums/viewtopi ... t=40#p6472
RS232 .. https://pcmhacking.net/forums/viewtopic.php?f=14&t=396
USB .. https://pcmhacking.net/forums/viewtopic.php?f=14&t=164
Information regarding using the flashtool with the VX and VY flash PCMs can be found here ... https://pcmhacking.net/forums/viewtopi ... t=40#p6472
Re: New to this....
Ok VL400 i just sent you a PM. So that USB connector plugs into the OBDII plug under the drivers feet or one near the PCMVL400 wrote:Using the OBD/Diagnostic connector, its OBD-II style connector but the data is OBD-I. Any ALDL interface will do, can get them from here if you want..
RS232 .. https://pcmhacking.net/forums/viewtopic.php?f=14&t=396
USB .. https://pcmhacking.net/forums/viewtopic.php?f=14&t=164
Information regarding using the flashtool with the VX and VY flash PCMs can be found here ... https://pcmhacking.net/forums/viewtopi ... t=40#p6472
Excuse my dumbness...
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: New to this....
Will connect under the steering column area, near the drivers feet/legs.