ds 1245y sram programing
ds 1245y sram programing
Hi guys trying to flash the sram in my kalmaker realtime computer with my willem pcb35 programer and it won't have a bar of it not sure if it the off setts etc that r giving me the problem . regards Jason
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: ds 1245y sram programing
more information needed. what are you flashing on to it (how big is the file?) are you using any adaptors? what offsets are you trying? what does 'wont have a bar of it' mean - what is the actual error message?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: ds 1245y sram programing
Hi, i'm flashing a vt v8 kalmaker bin on 2 it which r 64k but i save the file in kalmaker by saving as a multifill so it turns it in to a 128k bin, so its the same size as the sram it flashes it but when it verifies it , it comes up with a check sum error buffer is different to sram?, so it won't work
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: ds 1245y sram programing
you can do it manually, program from 0x0 offset then program a second on at 0x10000 offset ....
are you getting the checksum error when programming or when trying to use it with kalmaker ?
are you getting the checksum error when programming or when trying to use it with kalmaker ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: ds 1245y sram programing
hi, the prob is when i'm programing it. regards jason
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: ds 1245y sram programing
so it fails somewhere through the writing process ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread