Ose 12p flex output
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Ose 12p flex output
I'd like to use a flex output to activate the electronic kickdown function on a th400 auto. The way it functions normally is either through an accelerator pedal mounted switch or throttlebody mounted micro switch that's activated at wot. Can anyone confirm that I've actually set it properly. Will post the bin and xdf
- Attachments
-
- FLEX OUTPUT OSE12P V112 - 1,2 and 3 bar.xdf
- (407.17 KiB) Downloaded 372 times
-
- FLEX OUTPUT OSE $12P V112 BLCF V8.BIN
- (32 KiB) Downloaded 413 times
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Ose 12p flex output
the table layout looks ok, but I would check your flashtool settings, i'd set the tick box for digital on/off (relay) and run it through a relay that's powered from igniton for safety.
you might find you can even lower the tps % that it activates to improve response, ie. at lower revs kick down at 50-70% might be better and less aggressive.....
you might find you can even lower the tps % that it activates to improve response, ie. at lower revs kick down at 50-70% might be better and less aggressive.....
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: Ose 12p flex output
Thanks mate. I was thinking about playing with the table once it's set up.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Ose 12p flex output
yeah and that side of it is just trial and error and "nice to have" how you have it will pretty much mimic the old style kick down at least.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread