Hi all,
looking for some help with an issue I've got with a knock off unit, yeah I know, serves me right... Won't connect to WIFI.
or if someone has a second hand genuine unit they would sell I'm keen.
Cheers, Gareth.
MB Star SD connect C4 - any one got one?
MB Star SD connect C4 - any one got one?
According to chemistry, alcohol is a solution...
Re: MB Star SD connect C4 - any one got one?
Right...
It looks like there are ways around this, http://mhhauto.com/Thread-das-pass-thru-avdi-interface but this is a fair way over my head... I have a drewtech cardaq M.
To clarify what Im trying to do here is use 'Xentry/DAS' (merc software) to recode a SAM module.
It looks like there are ways around this, http://mhhauto.com/Thread-das-pass-thru-avdi-interface but this is a fair way over my head... I have a drewtech cardaq M.
To clarify what Im trying to do here is use 'Xentry/DAS' (merc software) to recode a SAM module.
According to chemistry, alcohol is a solution...
Re: MB Star SD connect C4 - any one got one?
Just skimmed through the posts.
So install the DAS software installed (Version...?? Dunno??), copy in the cal/slave files to where it installed and double click the install das PT file.
Should then be able to open up DAS and use your drewtech as the passthrough. Theres a file in that thread for the drewtech cardaq plus
So install the DAS software installed (Version...?? Dunno??), copy in the cal/slave files to where it installed and double click the install das PT file.
Should then be able to open up DAS and use your drewtech as the passthrough. Theres a file in that thread for the drewtech cardaq plus
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: MB Star SD connect C4 - any one got one?
Thanks for taking a look Tazzi
I've followed everything I can work out in that post but the cardaq isn't discoverable in the SDtoolkit... One post makes mention of adding the files to the correct locations (CAL.INI and SLAVE.INI) but searching my pc I can't find files named that to replace?...
Xentry/DAS version is current as of 3/2017
Cheers.
I've followed everything I can work out in that post but the cardaq isn't discoverable in the SDtoolkit... One post makes mention of adding the files to the correct locations (CAL.INI and SLAVE.INI) but searching my pc I can't find files named that to replace?...
Xentry/DAS version is current as of 3/2017
Cheers.
According to chemistry, alcohol is a solution...
Re: MB Star SD connect C4 - any one got one?
Ill double check it now mateBiggvl wrote:Thanks for taking a look Tazzi
I've followed everything I can work out in that post but the cardaq isn't discoverable in the SDtoolkit... One post makes mention of adding the files to the correct locations (CAL.INI and SLAVE.INI) but searching my pc I can't find files named that to replace?...
Xentry/DAS version is current as of 3/2017
Cheers.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: MB Star SD connect C4 - any one got one?
This is where the cmd file saves them to:
copy cal.ini "C:\Programme\DAS\BIN\cal.ini"
copy SLAVE.ini "C:\Programme\DAS\BIN\driver\SLAVE.ini"
But.. thats going to be wrong because its made for a different language hence the 'Programme'.
Im guessing you would need to chuck them in here??
C:\Program Files\DAS\BIN\cal.ini
C:\Program Files\DAS\BIN\driver\SLAVE.ini
copy cal.ini "C:\Programme\DAS\BIN\cal.ini"
copy SLAVE.ini "C:\Programme\DAS\BIN\driver\SLAVE.ini"
But.. thats going to be wrong because its made for a different language hence the 'Programme'.
Im guessing you would need to chuck them in here??
C:\Program Files\DAS\BIN\cal.ini
C:\Program Files\DAS\BIN\driver\SLAVE.ini
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: MB Star SD connect C4 - any one got one?
Also the only difference I can see in the files is the name of the device.
So the cardaq one says: "Drew Technologies Inc. - CarDAQ PLUS"
May need to double check if that is the exact name of your device when plugged into the laptop?
So the cardaq one says: "Drew Technologies Inc. - CarDAQ PLUS"
May need to double check if that is the exact name of your device when plugged into the laptop?
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: MB Star SD connect C4 - any one got one?
I had a play with this for most of the day (whilst on the phone and running the shop) i don't have those file address at all, also did a seach for those files at the start menu, no luck.. the device shows as above when connected.Tazzi wrote:Im guessing you would need to chuck them in here??
C:\Program Files\DAS\BIN\cal.ini
C:\Program Files\DAS\BIN\driver\SLAVE.ini
According to chemistry, alcohol is a solution...
Re: MB Star SD connect C4 - any one got one?
If there a desktop icon, can you right click on that, and select 'open location' or 'go to location'. Its one of those... it should take you to the install directory. Need to go to where that DAS software installs to.Biggvl wrote: I had a play with this for most of the day (whilst on the phone and running the shop) i don't have those file address at all, also did a seach for those files at the start menu, no luck.. the device shows as above when connected.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726